Skip to product information
1 of 13

SISER EasyWeed STRETCH Heat Transfer Vinyl Sheet 12"x15"

SISER EasyWeed STRETCH Heat Transfer Vinyl Sheet 12"x15"

Regular price $1.99
Regular price $4.99 Sale price $1.99
Sale Sold out
Shipping calculated at checkout.
Select

Sheet Size: 12"x15"

[ BRAND: SISER ]

Performance wear has met its match! Delivers all the benefits of our Siser EasyWeed heat transfer material and combines it with super stretchability to create one remarkable heat transfer material! Ultra-matte finish and a soft hand. Comes on a pressure-sensitive carrier that allows for cutting and weeding detailed designs. This material can be layered!

CPSIA Certified, so it's perfect for decorating children's clothing and accessories.

[ APPLIES TO ]

  • 100% cotton
  • Poly/cotton blends
  • 100% polyester
  • Leather
  • Lycra®/Spandex

[ APPLICATION INSTRUCTIONS-HOME IRON ]

• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

[ APPLICATION INSTRUCTIONS-HEAT PRESS ]

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 305°
• Use light/medium pressure for 15 seconds
• Peel carrier hot or cold

[ LAUNDERING ]

  • Wait 24 hours before 1st wash
  • Machine wash cold / mild detergent
  • Dry on normal dryer setting
  • Do not dry clean

[ SPECIFICATIONS ]

PU Composition • Pressure sensitive backing • Ultra-matte finish • 85 Microns/3.5 Mils • 45°/60° blade

[ CUTTER SETTINGS ]

Cricut®:

Blade: Standard
Setting: Iron-On

Silhouette Cameo:

Blade: Standard, 3
Setting: Heat Transfer Material (Smooth)
Speed: 8
Thickness: 6

Brother:

Blade: 2
Cut Speed: 1
Cut Pressure: 1

Roland GX-24:

Blade: 45°
Gram Force: 60-70
Offset: .250
Speed: 30 cm/s

Graphtec:

Blade: 45°
Gram Force: 9-10
Tool: CB09U+0
Speed: 30 cm/s

[sheets sizes may vary from + or - half of an inch]

View full details